Kia Cee'd: Tail Gate / Tail Gate Latch Repair procedures
| • |
When prying with a flat-tip screwdriver, wrap it with protective
tape, and apply protective tape around the related parts, to
prevent damage.
|
| • |
Put on gloves to protect your hands.
|
|
| 1. |
After loosening the mounting bolts, then remove the tail gate latch
assembly (A).
|
Tightening torque :
6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)
|
|
| 2. |
Disconnect the tail gate latch connector (A).
|
| 3. |
Install in the reverse order of removal.
| •
|
Make sure the tail gate locks/unlocks and opens/closes
properly.
|
| •
|
Adjust the tail gate alignment.
|
| •
|
Make sure the connectors are connected in properly.
|
|
|
Component Location
1. Tail gate latch assembly
...
Replacement
•
Take care to not let the tailgate fall on you as the lifts are
r ...
Other information:
Kia Cee'd JD Service Manual: Troubleshooting
Engine Overheat Troubleshooting
Inspection
Remedy
Visual inspection
Inspect for shortage of coolant in reservoir tank .
Reinspect after replenishing coolant.
Inspect for coolant pollution after ...
Kia Cee'd JD Service Manual: EPB Switch Repair procedures
Remove
1.
Turn ignition OFF and disconnect the negative (-) battery cable.
2.
Remove the floor console upper cover.
(Refer to Body - "Floor console assembly")
3.
Remove the EPB switch ...
Tail Gate Latch Components and components location
Tail Gate Lift Repair procedures