Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: A/C Pressure Transducer Replacement - Air Conditioning System - Heating,Ventilation, Air Conditioning - Kia Rio UB 2012-2020 Service ManualKia Rio: A/C Pressure Transducer Replacement

1.
Disconnect the negative (-) battery terminal.
2.
Recover the refrigerant with a recovery/charging station.
3.
Disconnect the A/C pressure transducer connector (A).
4.
Remove the A/C pressure transducer (A).
Tightening torque:
10~12 N.m (1.02~1.22 kgf.m, 7.4~8.8 lb-ft)



     
Take care that liquid & suction pipe are not bent.
5.
Install in the reverse order of removal.



     
When installing, replace with new O-ring (A).
A/C Pressure Transducer Inspection
1. Measure the pressure of high pressure line by measuring voltage output between terminal “1” and “2”. 2. Inspect the voltage valu ...
Evaporator Temperature Sensor Description
The evaporator temperature sensor will detect the evaporator core temperature and interrupt compressor relay power in order to prevent evaporator freezing by excessive cooling. ...
See also:

Front Driveshaft Component
1. Driveshaft (LH) 2. Circlip 3. Circlip 4. Driveshaft (RH) ...

Replacement
Rear Brake Pads 1. Loosen the guide rod bolt (B) and then remove the rear caliper body (A). Tightening torque: 21.6 ~ 31 ...

Vehicle load limit
Tire and loading information label The label located on the driver's door sill gives the original tire size, cold tire pressures recommended for your vehicle, the number of people that can be ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts