Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: Adjustment - Specification - Engine Control System - Engine Control / Fuel System - Kia Rio UB 2012-2020 Service ManualKia Rio: Adjustment

ETC module learning procedure
When installing new ETC module or re-installing it, ETC module learning procedure must be performed.
1.
Hold the ignition key or the start button at the IG ON position during 5 seconds.
2.
Turn ignition swich OFF and then start the engine.

     
DTC codes (P0638, P2110) might be displayed if ETC module learning procedure does not performed after replacing ETC module.
Installation
   • Install the component with the specified torques. • ...
Manifold Absolute Pressure Sensor (MAPS)
...
See also:

Trunk Lid Adjustment
1. After loosening the trunk lid hinge (A) mounting bolt, adjust the trunk lid by moving it up or down, or right or left. 2. Adjust the tru ...

Special driving conditions
Hazardous driving conditions When hazardous driving conditions are encountered such as water, snow, ice, mud, sand, or similar hazards, follow these suggestions: Drive cautiously and allow extr ...

Photo Sensor (FATC only) Inspection
1. Turn the ignition switch ON. 2. Connect the GDS. 3. Emit intensive light toward photo sensor using a lamp, a ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts