Kia Rio: Driver Airbag (DAB) Module and Clock Spring Inspection
| Driver Airbag (DAB) |
If any improper parts are found during the following inspection, replace
the airbag module with a new one.
Never attempt to measure the circuit resistance of the airbag
module (squib) even if you are using the specified tester. If the circuit
resistance is measured with a tester, accidental airbag deployment will
result in serious personal injury.
|
1. |
Check pad cover for dents, cracks or deformities.
|
|
2. |
Check the airbag module for denting, cracking or deformation.
|
|
3. |
Check hooks and connectors for damage, terminals for deformities,
and harness for binds.
|
|
4. |
Check airbag inflator case for dents, cracks or deformities.
|
|
5. |
Install the airbag module to the steering wheel to check for fit
or alignment with the wheel.
|
Clock Spring
|
1. |
If, as a result of the following checks, even one abnormal point
is discovered, replace the clock spring with a new one.
|
|
2. |
Check connectors and protective tube for damage, and terminals
for deformities.
|
1.
Set the front tires straight-ahead before removing the steering
wheel.
...
1.
Set the front tires straight-ahead before assembling the steering
wheel.
...
See also:
Fluid Replacement
ATF of 6 speed automatic transaxle doesn’t need to be replaced.
If the vehicle is used severely in business or personal ...
Troubleshooting
Symptom
Suspect Area
Remedy (Refer to page)
Water leaks from sunroof
Dirt accumulated in drain tube
Clear dirt inside of drain
Clogged drai ...
Description
Continuous Variable Valve Timing (CVVT) system advances or retards the
valve timing of the intake and exhaust valve in accordance with the ECM control
signal which is calculated by the engine ...
Driver Airbag (DAB) Module and Clock Spring Removal
Driver Airbag (DAB) Module and Clock Spring Installation