Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: ESC Control Module Removal - ESC(Electronic Stability Control) System - Brake System - Kia Rio UB 2012-2020 Service ManualKia Rio: ESC Control Module Removal

1.
Turn ignition switch OFF.
2.
Pull up the lock of the HECU connector (A), and then disconnect the connector.


3.
Disconnect the brake tubes from the HECU by unlocking the nuts counterclockwise with a spanner.

Tightening torque:
A : 12.7 ~ 16.7 N.m (1.3 ~ 1.7 kgf.m, 9.4 ~ 12.3 lb-ft)
B : 18.6 ~ 22.6 N.m (1.9 ~ 2.3 kgf.m, 13.7 ~ 16.6 lb-ft)


4.
Loosen the HECU bracket nuts (A), then remove HECU and bracket.

Tightening torque:
16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~ 18.8 lb-ft)



     
Never attempt to disassemble the HECU.
The HECU must be transported and stored in.
Never shock to the HECU.
5.
Remove the 3 bolts, and then remove the bracket from HECU.

Tightening torque:
11 ~ 14 N.m (1.1 ~ 1.4 kgf.m, 8.1 ~ 10.3 lb-ft)

ESC Control Module Components
1. Front - left tube 2. Rear - right tube 3. Rear - left tube 4. Front - right tube 5. MC2 6. MC1 7. ESC control module (HECU) 8. Damper 9. Bracket ...
ESC Control Module Installation
1. Installation is the reverse of removal. 2. Tighten the HECU mounting bolts and nuts to the specified torque. 3. ...
See also:

Audio Remote Control Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the driver airbag module. (Refer to the RT group - "DAB and Clock spring ...

Hood switch Inspection
1. Disconnect the hood switch connector (A). 2. Check for continuity between terminals ...

Windshield Glass Components
1. Windshield glass 2. Windshield glass moulding ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts