Kia Rio: Hazard Lamp Switch Removal

License Lamp Installation

1. Install the bulb. 2. Connect the lens and license lamp. ...

Hazard Lamp Switch Installation

1. Connect the connectors. 2. Install the hazard lamp switch. 3. Connect the negative (-) battery terminal. ...

See also:

ISG OFF Switch: Inspection
1. Remove the crash pad side switch assembly (A) from the switch panel on the crach pad of the driver's side. 2. Remove the ISG ...

Driver's and passenger's front air bag
Your vehicle is equipped with an Advanced Supplemental Restraint (Air Bag) System and lap/shoulder belts at both the driver and passenger seating position. The indications of the system's prese ...

Brake Booster Operating Test
For simple checking of the brake booster operation, carry out the following tests. 1. Run the engine for one or two minutes, and then stop it. If the pedal depresses ...