Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: Vehicle data collection and event data recorders - Introduction - Kia Rio UB 2012-2020 Owners ManualKia Rio: Vehicle data collection and event data recorders

This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road obstacle, data that will assist in understanding how a vehicle's systems performed. The EDR is designed to record data related to vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less. The EDR in this vehicle is designed to record such data as:

* How various systems in your vehicle were operating;

* Whether or not the driver and passenger safety belts were buckled/fastened;

* How far (if at all) the driver was depressing the accelerator and/or brake pedal; and,

* How fast the vehicle was traveling

These data can help provide a better understanding of the circumstances in which crashes and injuries occur. NOTE: EDR data are recorded by your vehicle only if a non-trivial crash situation occurs; no data are recorded by the EDR under normal driving conditions and no personal data (e.g., name, gender, age, and crash location) are recorded.

However, other parties, such as law enforcement, could combine the EDR data with the type of personally identifying data routinely acquired during a crash investigation.

To read data recorded by an EDR, special equipment is required, and access to the vehicle or the EDR is needed. In addition to the vehicle manufacturer, other parties, such as law enforcement, that have the special equipment, can read the information if they have access to the vehicle or the EDR.

Fuel requirements
Your new Kia vehicle is designed to use only unleaded fuel having a pump octane number ((R+M)/2) of 87 (Research Octane Number 91) or higher. Your new vehicle is designed to obtain maximum performa ...
Indicator symbols on the instrument cluster
Air bag warning light ABS warning light Seat belt warning light Turn signal indicator High beam indicator Tail light indicator Front fog light indicator Engine oil pressure warn ...
See also:

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the variable intake solenoid valve connector ( ...

SS-A Solenoid Valve(ON/OFF) Circuit Diagram
...

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Lift the vehicle. 3. D ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts